產品介紹

影像卡

RadientPro CL

Matrox RadientPro CL
  • Matrox RadientPro CL系列為Camera Link影像擷
    取卡
  • 在Full與80-bit Camera Link模式下可支援高達85
    MHz的速率
  • 供電型Camera Link(PoCL)影像卡,減少電源佈線
  • Matrox FPGA Development Kit (FDK),易於制定
    的內建前處理晶片

 

Hardware
  • PCIe® 2.0 x8 host bus interface
  • Altera Stratix V 340K LE FPGA device
    • for Matrox or custom image processing algorithms designed with Matrox FDK
  • 2 GB of DDR3-1600 SDRAM
  • 0/16/32 MB of QDR2 SRAM
  • Camera Link® 2.0 acquisition
    • Mini Camera Link connectors (HDR-26)
    • Power over Camera Link with SafePower
    • 20 to 85 MHz Camera Link clock
    • One (1) Medium/Full Camera Link port (single-Full model)
      • Support for 8-tap x 10-bit and 10-tap x 8-bit (80-bit) modes
    • Two (2) Base Camera Link ports (dual-Base model)
  • Supports frame and line scan sources
  • On-board image reconstruction
  • On-board color space conversion
  • Input formats
    •  - no/Bayer 8-bit and 16-bit
    •  - GR packed 24-bit and 48-bit
  • Output formats
    • Mono 8-bit and 16-bit
    • 24-bit BGR/RGB packed
    • 32/48-bit BGRa/RGBa
    • YUV 16-bit - YCrCb
  • One (1) DBHD-15 male GPIO connector
    • Three (3) TTL configurable auxiliary I/O’s
    • Two (2) LVDS auxiliary inputs
    • One (1) LVDS auxiliary output
    • Two (2) opto-isolated auxiliary inputs
  • Optional add-on DBHD-15 male GPIO connector
    • Three (3) TTL configurable auxiliary I/O’s
    • Two (2) LVDS auxiliary inputs
    • One (1) LVDS auxiliary output
    • Two (2) opto-isolated auxiliary inputs
  • Support for one (1) quadrature rotary encoder per Camera Link® port
  • MIL license fingerprint and storage
Dimensions and environmental information
  • Matrox RadientPro CL - 167.6 mm L x 111.1 mm H x 18.7 mm W (6.6” x 4.38” x 0.74”)
  • Operating temperature: 0 to 40 °C (32 to 104 °F)
  • Relative humidity: up to 95% (non-condensing)
  • FCC class A
  • CE class A
  • RoHS-compliant

 

Software

  • Matrox Imaging Library (MIL) drivers for 64-bit Windows 7/8.1/10
  • MIL drivers for 64-bit Linux
  • Implements GenICam™ 2.3.1 (CLProtocol 1.1) and GenICam GenCP 1.0 under Windows/Linux
  • MIL drivers for RTX64
  • Optional Matrox FDK for use with Impulse CoDeveloper and Altera Quartus® II

 

產品手冊下載:

 Download